B2B Product Marketing

How to explain fraud on video. Make the invisible threat visible.

Good fraud prevention is invisible. When it works, the fraudster is turned away, the honest customer is approved in seconds, and nobody notices anything happened. That is exactly what the business wants, and it is the hardest thing in B2B to put on screen. You can't film a fraud signal, a synthetic identity or a check that runs in a fraction of a second.

The problem keeps growing. In 2025, US consumers filed 3 million fraud reports with the Federal Trade Commission and reported $15.9 billion in losses, up from just over $12 billion the year before. Imposter scams, where someone pretends to be someone they are not, were the most reported type, as they have been every year since 2020.

This guide is for product marketers at fraud, risk and identity verification companies. It covers why fraud is harder to film than other security and four ways to put it on screen, with worked examples from our films for LexisNexis Risk Solutions, and ends with a checklist for your next brief. For general explainer craft, start with our guides to security product explainers and explainers for technical products.

The problem

Why fraud is harder to show than other security.

Fraud sits inside the security category, but its films have three problems a typical cybersecurity explainer doesn't.

The win is a non-event

A security film can show an attack being stopped. A fraud film often has to show a transaction that simply goes through, because the fraudulent one never got that far. There is no alert and no dramatic moment. The product's best day looks like an ordinary one.

The threat is a person, not a program

Malware can be drawn as a shape moving through a network. Fraud is usually a person pretending to be someone else, with a stolen document, a borrowed identity or a face generated by AI. Showing that clearly, without making every customer look suspicious, takes care.

Two audiences, two jobs

The fraud or risk team buys the product, and compliance and the board sign it off. But the people who actually meet it are the honest customers being onboarded. A fraud video often has to convince the buyer it is thorough and show the end customer it is easy, sometimes in the same 90 seconds.

Put together, these three problems explain why so many fraud films fall back on the same safe images: a padlock, a shield, a dashboard full of green ticks. Those images are clear, but they are interchangeable, and a buying committee comparing four vendors will not remember whose padlock was whose. The four sections below show how to get past them.

The threat

Show the fake without teaching the fake.

Deepfakes and synthetic identities are the threats fraud buyers ask about most, and the hardest to show responsibly. Stay too vague and the threat feels abstract. Go into too much detail and you have made a tutorial.

The answer is to explain the idea of the attack, not the method. Show what a deepfake is and why it can fool a camera, at the level a buying committee needs, then move quickly to how it gets caught. The buyer should leave understanding the risk, not able to repeat it.

Synthetic identities need a different picture from deepfakes. A deepfake is a fake face; a synthetic identity is a fake person, stitched together from real and invented details until it passes as someone who exists. It has no face to glitch. The clearest way to show it is often as a build: pieces of an identity assembling into something that looks complete, until one piece fails to fit.

Use faces and documents that belong to no one. An invented face, or a face that visibly glitches and fails to hold together, tells the story just as well as a convincing fake of a real person, and it avoids the consent questions a real person's face would raise.

Keep the threat short. In most fraud films the threat should take no more than a third of the running time. Its job is to make the buyer lean in, not to scare them, and the longer it runs, the more it starts to feel like a scare tactic. A good test: if you cut the film off at the end of the threat section, would the viewer know what to do about it? If the answer is no, the proof needs to start sooner.

LexisNexis Risk Solutions · Deepfakes Explained

The threat film in a pair. It leads with the threat the buyer already fears: how a deepfake is made, and why it is a fast-growing threat to identity verification. Then it hands over to the proof.

What to brief

  • The one attack type the film explains. One per film.
  • How much detail is fair to show, agreed with legal before scripting.
  • Which film answers it. A threat film works best when the proof comes straight after.

The proof

Show the check behind the yes.

From the customer's side, identity verification is a single moment. They hold up a document, take a selfie and get a green tick. The value of the product is everything that happened in the second before that tick, and that second is the story.

Slow it down. Take one approval and open it up, so the buyer sees how much work sits behind a result that looks simple. Numbers help here, as long as they are real, specific to the product and cleared by your team. "Hundreds of checks" is forgettable. A specific number the buyer can repeat to their boss is not.

Structure helps the number land. Start with the moment the customer sees, zoom into what happens behind it, then pull back out to the same moment, now understood. The viewer ends where they began, but they see the green tick differently. That return is what makes the film easy to remember and easy to retell in a sales meeting.

This kind of film also earns its keep after launch. Sales teams use it when a prospect asks how thorough the checks really are, and it answers that question faster than a slide.

LexisNexis Risk Solutions · 300 ID Checks

Goes inside a single confirmed identity to show the three hundred checks running behind it, made to land in seconds. Paired with Deepfakes Explained, it forms two sides of one argument: the threat outside, and the depth inside.

What to brief

  • The one result the customer sees.
  • The real number or list of checks behind it, cleared by product and legal.
  • The order the buyer should see them in, from the most familiar check to the one only you do.

The context

Show identity as a pattern, not a snapshot.

A lot of fraud gets through because each check looks at one thing at a time: one document, one photo, one record. Fraud teams know the better answer is context, how signals connect over time and across sources. Context is even harder to film than a single check.

Pick one picture of the idea and build the whole film around it. A person shown as a collection of moments rather than one photo. Records that only make sense once they connect. The aim is for the buyer to understand why more context makes a better decision, without sitting through a diagram of your data.

The trap here is complexity. Context-based products usually have the most going on underneath: networks, scores, models and data partnerships. It is tempting to show all of it, because all of it is impressive. Resist that. Show enough for the buyer to trust that the depth exists, and save the detail for the demo and the technical evaluation that follows.

LexisNexis Risk Solutions · Identity Intelligence

Built on one idea: a person is bigger than any single snapshot of them. It moves from the limits of record-by-record verification to the Risk Intelligence Network behind the product, and lands on the question every check is really asking. Does this identity make sense?

What to brief

  • The one-line idea the whole film hangs on.
  • The moment the film turns from the problem to the product.
  • The question you want the buyer to keep asking after the film ends.

The customer

Don't make honest customers feel like suspects.

Fraud teams live with a trade-off. Every extra check stops more fraud, and every extra step loses more good customers. Buyers judge your product on both sides of that line, so a film that only shows fraud being blocked sells half the product.

Show both people. The honest customer passes through quickly and barely notices. The fraudster is stopped quietly in the background. That balance is what fraud and risk buyers are trying to buy, and it is also the version you can safely put in front of end customers on an onboarding page.

Show the bad actor as behaviour rather than as a person: a pattern that doesn't fit, a document that doesn't match, a face that won't hold still. It keeps the film clear of stereotypes, which compliance teams will thank you for, and it keeps the focus on what your product actually detects.

Think about where the end customer will see it. A version for an onboarding page or app store listing should lead with speed and ease, with the fraud check almost in the background. A version for the risk team can lead with the fraud being caught. Same footage, two edits, each built for the person watching it.

The brief

What to put in your fraud explainer brief.

A fraud film is only as clear as the brief behind it. Our video brief template covers the basics. For fraud, add these:

  • One fraud type per film. Synthetic identity, deepfakes, account takeover or document fraud. A film that covers all of them explains none.
  • The signal your product sees that others miss. This is the heart of the film.
  • The result the customer sees, and what happens behind it.
  • Who has to trust the film: the buyer, compliance, the board and the end customer.
  • What can't be shown. Real customer data, real cases and real faces. Agree it with legal on day one.
  • Where the cuts will run: sales emails, onboarding pages, conference screens or board decks. Our guide to the video kit sales actually sends covers the cuts.
  • The one picture that makes it yours. A metaphor, a character or a visual style nobody else in fraud is using.

The takeaway

Show the fraud that didn't happen.

Every fraud product has the same problem: its best work leaves no trace. The films that work find a way to show that missing moment, whether it's the threat outside, the checks inside, or the context around a single decision, and they show it calmly enough for compliance and clearly enough for a board.

Start with one fraud type, one signal and one picture. Pair the threat with the proof. Show the honest customer as well as the fraudster. Then cut the film for every place it will run, from the sales email to the onboarding page.

Fraud buyers see a lot of films that look alike. Clear gets you understood. Distinctive gets you remembered.

Selling something nobody can see? We make fraud easy to follow.

Launch and explainer video for security, identity and fraud companies. 30 minutes with a producer, and you leave with a format, a budget range and a timeline.

Questions

Frequently asked questions.

Most fraud explainers work at 60 to 90 seconds, with 15 to 30 second cuts for social and sales emails. Awareness pieces can be shorter: 300 ID Checks was made to land in seconds.

Usually not. Real customer data and case details rarely clear legal, and they date quickly. Build a realistic scenario with invented people and documents, and keep real numbers for your product's own results, cleared by your team.

Use a generated or illustrated face that belongs to no one, or show the effect instead: a face that glitches or won't hold together. The buyer only needs to understand the risk, not see a perfect fake.

Animation suits most fraud films, because the threat and the checks are invisible and you control every detail of what is shown. Live action works for the human side, like a customer being onboarded. Many fraud films mix the two.

Lead with the business risk in plain words, show the check working, and keep the tone calm. Boards want to see that the risk is understood and handled. A short cut of the main film, with less product detail, often works better than the full explainer.

A typical project runs from Day 00, when the brief is agreed, to Day 28, when the cuts are delivered, with concepts back on Day 07. Allow extra time for legal and compliance review, which fraud films almost always need.